-
Current at: 08 October 2008
Non-structural overlay Natural Timber Strip Flooring (Nat)
Natural timber floors, just like all quality products, must be handled, stored, installed and maintained with care to ensure excellent service. This leaflet answers many of the most asked questions about overlay natural timber floors and highlights important precautions and considerations which you should discuss with your flooring supplier, builder and/or installer before you proceed.
This information has been developed and supplied by Timber Development Association (NSW), www.timber.net.au and HIA makes no representation as to its accuracy, currency or completeness. The information is provided on the basis that you undertake your own assessment as to its suitability for your purposes.
Click for more information
-
Current at: 29 September 2008
Retaining walls - things to think about? (Nat)
Retaining walls are a common feature of many backyards and whilst they may be a small part of the building work, it is important that they are built to suit the block of land and to ensure their safety.
Click for more information
-
Current at: 29 September 2008
Floor and wall tiling - potential problems and solutions (Nat)
When tiling walls and floors, there are a few tips that can help you avoid some of the common problems and perhaps give you some ideas to help your next tiling job go smoothly.
Click for more information
-
Current at: 26 September 2008
What is the HIA Guide to Materials and Workmanship (NSW/Hunter/ACT/Vic/Tas)
The HIA Guide has been prepared to provide members with support in their day to day business. The primary aim of the Guide is to give an unbiased workable solution to non-regulated construction aspects where workmanship may lead to a variation in the finished product.
Click for more information
-
Current at: 26 September 2008
How to reference the HIA Guide to Materials and Workmanship (NSW/Hunter/ACT/Vic/Tas)
The HIA Guide has been prepared to assist in disputes with clients.The HIA Guide includes a set of accepted industry standards. In the case of a dispute over defective work or misunderstanding over qualities of workmanship and tolerances it can be used as a point of reference for both the builder and the owner.
Click for more information
-
Current at: 11 September 2008
Cold Weather Concreting (Nat)
When specifying concrete it is important to take into account the season and the time of placement, as there is a different ordering and placement procedure between hot and cold weather. Precautions especially need to be taken when the air temperature falls below 10°C.
Click for more information
-
Current at: 30 July 2008
Tongue and groove flooring (Nat)
Tongue and grove natural timber floors, just like all quality products, must be handled, stored, installed and maintained with care to ensure excellent service. This leaflet answers many of the most frequently asked questions about and highlights important precautions and considerations which you should discuss with your flooring supplier, builder and/or installer before you proceed.
This information has been developed and supplied by Timber Development Association (NSW), www.timber.net.au and HIA makes no representation as to its accuracy, currency or completeness. The information is provided on the basis that you undertake your own assessment as to its suitability for your purposes.
Click for more information
-
Current at: 30 July 2008
Dealing with efflorescence in masonry (Nat)
Efflorescence normally occurs within the first year after construction and typically is only an aesthetic concern and does not pose any structural threat to the concrete or mortar.
Click for more information
-
Current at: 30 July 2008
Glancing light on plasterboard (Nat)
HIA members should understand how the overall appearance of plasterboard is likely to be affected by ‘glancing light’ and the choice of decoration (lighting/painting). It is important to understand that the selection and position of light fittings can play a major role in minimising the effects of glancing light on plasterboard surfaces.
Click for more information
-
Current at: 08 July 2008
An industry guide to the correct installation of windows (Nat)
The Australian Window Association is pleased to produce this Industry Guide for the Installation of Windows and Doors as part of its commitment to raising the standard of the built performance of windows and doors in Australia.
Click for more information
-
Current at: 08 July 2008
Beware of windows that do not comply - AWA (Nat)
The BCA calls up windows that comply with AS 2047. Are you using products that comply? It is your responsibility to ensure your window manufacturer has compliance to AS 2047 or it will end up costing the builder or the owner a lot of money
Click for more information
-
Current at: 02 July 2008
Dust in Cabinetry Hardware (Nat)
When installing cabinetry of any type it is important to ensure that dust created during fitting is prevented from penetrating any hardware such as drawer runners, hinges, locks and the like.
Click for more information
-
Current at: 03 September 2007
Mortar mixes for brickwork and masonry (Nat)
Which mortar should you use? What is M class? What does exposure class mean? This information sheet helps you understand the ins and outs of mortar mixes for brickwork and masonry.
Click for more information
-
Current at: 18 May 2007
Termite Treated Framing, Wall and Ceiling Lining Adhesive (Nat)
Use of termite treatment to timber frames has raised concerns about residue from the treatment process affecting the integrity of adhesives commonly used when fixing internal linings. This article discusses the issue and provides advice to address the situation.
Click for more information
-
Current at: 16 May 2007
Machine Grade Pine - MGP (Nat)
Machine Graded Pine (MGP) is a product which is the result of a research and development program undertaken by Pine Australia on behalf of its producer members. MGP grades have been introduced as an effective way to use the new design properties.
Click for more information