This information sheet sets out the rules in relation to glass balustrades when used at heights above 1 metre, such as on stair cases, decks and balconies. Click for more information
Lightweight polystyrene cladding systems are among non-BCA compliant systems and unlike some other systems are considered to be an alternative solution and require special attention at the building approval stage. Click for more information
The public comment draft of changes to the BCA for 2013 has been released. Submissions are due by 1 August and this information sheet outlines the key issues that will affect new houses. Click for more information
This information sheet provides a summary of changes to the BCA that started 1 May 2012. The information explains amendment to call up two new Australian Standards for masonry and residential slabs and footings. Click for more information
This information sheet provides a summary of changes to the BCA that started 1 May 2012. The information explains new requirements for a handrail on stairs and changes to the requirements for wet areas. Click for more information
This information sheet is part of a series that explains when a building product needs to show it complies with the BCA and how a manufacturer or supplier can develop the necessary documents to proof it complies. Part 1 of 3. Click for more information
This information sheet is part of a series that explains when a building product needs to show it complies with the BCA and how a manufacturer or supplier can develop the necessary documents to proof it complies. Part 2 of 3. Click for more information
This information sheet is part of a series that explains when a building product needs to show it complies with the BCA and how a manufacturer or supplier can develop the necessary documents to proof it complies. Part 3 of 3. Click for more information
Amendments to AS 1684 and AS 1720 have been published by Standards Australia. The changes affect the Machine Grade Pine (MGP) classifications but do not take legal effect until they are called up by the BCA in May 2011. In the interim, suppliers and builders can choose to comply with the new standards or continue to comply with the current standards. Click for more information
One of the more contentious issues in relation to bathroom construction is the provision of floor wastes and when they are required. There is much anecdotal evidence out there in relation to this, but what are the facts? Click for more information
The pre-publication draft of the Building Code of Australia (BCA) 2009 Volume 2 (Housing Provisions) will provide clarification regarding the interpretation of Clause 3.8.3.3 for sanitary compartments, meaning that in some cases the requirement to design using a ‘lift-off’ door system may not apply. Click for more information
The question is often asked if it is required to install an airlock between a kitchen and a sanitary facility. Click for more information
The Building Code of Australia (BCA) is referred to as a ‘performance based’ document that provides flexibility when designing a building. But what does this degree of flexibility mean for those designing and constructing buildings and how can this be utilised in a practical sense? Click for more information
The relationship between the Building Code of Australia (BCA) and Australian Standards affects the work of builders and contractors daily and it is important to be clear on when an Australian Standard is legally binding and when it is not. Click for more information
The Building Code of Australia (BCA) Volume 2 - Housing Provisions contains requirements for balustrades and other barrier construction for Class 1 residential buildings. This information sheet contains the requirements in the 2008 BCA edition which incorporates some changes. Click for more information