HIA has published a revised 2nd edition of the HIA Guide to Materials and Workmanship for Residential Building Work.
Click for more information

The HIA Guide has been prepared to assist in disputes with clients.The HIA Guide includes a set of accepted industry standards. In the case of a dispute over defective work or misunderstanding over qualities of workmanship and tolerances it can be used as a point of reference for both the builder and the owner.
Click for more information

The HIA Guide has been prepared to provide members with support in their day to day business. The primary aim of the Guide is to give an unbiased workable solution to non-regulated construction aspects where workmanship may lead to a variation in the finished product.
Click for more information

Lightweight polystyrene cladding systems are among non-BCA compliant systems and unlike some other systems are considered to be an alternative solution and require special attention at the building approval stage.
Click for more information

The Insulation Council of Australia and New Zealand (ICANZ) have developed a free handbook publication which provides useful details on the right choices of insulation for your job and how to install insulation to meet the current requirements of the BCA.
Click for more information

This information sheet is part of a series that explains when a building product needs to show it complies with the BCA and how a manufacturer or supplier can develop the necessary documents to proof it complies. Part 1 of 3.
Click for more information

This information sheet is part of a series that explains when a building product needs to show it complies with the BCA and how a manufacturer or supplier can develop the necessary documents to proof it complies. Part 2 of 3.
Click for more information

This information sheet is part of a series that explains when a building product needs to show it complies with the BCA and how a manufacturer or supplier can develop the necessary documents to proof it complies. Part 3 of 3.
Click for more information

Condensation is an issue that comes up as a technical query whenever beads of moisture appear on non-absorbent surfaces. The effects of condensation which can become a problem are: blistering of paint, mould growth on walls and ceilings, water stains and the musty smell that eventuates.
Click for more information

There are a number of fundamental requirements and procedures that need to be followed to ensure long term performance of Tongue & Groove (T&G) flooring. The following requirements are applicable where a feature floor or covered floor are placed on the traditional timber bearer and joist systems.
Click for more information

Amendments to AS 1684 and AS 1720 have been published by Standards Australia. The changes affect the Machine Grade Pine (MGP) classifications but do not take legal effect until they are called up by the BCA in May 2011. In the interim, suppliers and builders can choose to comply with the new standards or continue to comply with the current standards.
Click for more information

The Australian Government has announced the phase-out or inefficient incandescent light bulbs over the next 3 years. The intention of the phase-out is to reduce energy consumption throughout the country as part of the Government’s commitment to reduce greenhouse gases by 60 per cent by 2050.
Click for more information

WELS was introduced in 2005 as a joint Federal and State Government initiative backed by the Water Efficiency Labelling and Standards Act 2005 to replace the 4A water efficiency rating system. The objective of the scheme is to encourage manufacturers to develop and market appliances and fittings that are more water efficient and to help consumers clearly identify and purchase water efficient products.
Click for more information

The standard practice when dimensioning floor plans is to show room size dimensions between the structural components of the walls and not include internal wall linings, for example plasterboard or wall tiling. However for ceiling heights, there is some difference of opinion within the building industry as to whether the dimension includes floor and ceiling linings or finishes.
Click for more information

Concrete is one of the easiest products to customise, it can be ground, polished, stamped, or stained, you can have glass, marble chips or other objects embedded in it. You can mould and sculpt it to create your own exclusive design and turn a rudimentary kitchen bench top into a distinctive piece of art.
Click for more information