Changes to the current BCA, such as a new requirement for wire balustrades and changes to the provisions for protection of structural steelwork, are among some of the expected changes for Building Code of Australia (BCA) 2009. Click for more information
The Building Code of Australia (BCA) is referred to as a ‘performance based’ document that provides flexibility when designing a building. But what does this degree of flexibility mean for those designing and constructing buildings and how can this be utilised in a practical sense? Click for more information
The Building Code of Australia (BCA) has specific provisions that require buildings to be constructed in such a manner that prevents water penetration into the building. One of the principle areas of concern of the BCA is water penetrating back into the building from overflowing gutters. This information sheet shows some of the options for installation. Click for more information
The relationship between the Building Code of Australia (BCA) and Australian Standards affects the work of builders and contractors daily and it is important to be clear on when an Australian Standard is legally binding and when it is not. Click for more information
Changes to BCA 2008, to start May 1 2008, will remove the separate energy provisions under the Victorian state variation for alterations and additions. This will mean that alterations and additions will need to comply with all of the energy provisions in the BCA Part 3.12 that require the building work to achieve a 5 Star energy rating. Click for more information
The BCA calls up windows that comply with AS 2047. Are you using products that comply? It is your responsibility to ensure your window manufacturer has compliance to AS 2047 or it will end up costing the builder or the owner a lot of money Click for more information
The Building Code of Australia (BCA) 2008 came into force on 1 May 2008. This year, there are changes to Volume 1 for Class 2 - 9 buildings and Volume 2 for Class 1 and 10 buildings. This information sheet provides details on the changes to Volume 2 for housing. Click for more information
Australian Standard 3000 - Wiring Rules for all electrical installations in Australia has been updated and will be introduced by all states and territories during mid-2008. Builders need to be aware of some changes in the standard which will affect house construction. Click for more information
This information sheet has been prepared to provide information about the requirements for installing smoke alarms in Class 1a and Class 1b buildings in accordance with Part 3.7.2 of the BCA Volume 2 - Housing Provisions. Click for more information
The new edition of the Australian/New Zealand Standard for Wiring Rules (AS/NZS 3000:2007) was released in November 2007. The new standard makes major changes to the rules for installing downlights, to prevent roof fires. These rules apply in all states and territories now, although some states have a 6 month transition period until May/June 2008. Click for more information
This information sheet has been prepared specifically to provide details on wire balustrades. More information on general requirements for balustrades is available in the information sheet titled “Balustrade Construction for Class 1 buildings”. Click for more information
The Building Code of Australia (BCA) Volume 2 - Housing Provision sets out requirements for stair construction in for Class 1a and 1b residential buildings. There are no Australian Standards for residential stair construction. Click for more information
Which mortar should you use? What is M class? What does exposure class mean? This information sheet helps you understand the ins and outs of mortar mixes for brickwork and masonry. Click for more information
The Victorian Guide to Standards and Tolerances has been updated and has been adopted by Victoria and NSW as of 1 January 2007. Click for more information