The new Rheem continuous flow range, with 12-, 16-, 20- or 26-litre per minute models, provides the homeowner with an even better six-star energy-efficient solution. The new designer colour and sleek appearance with concealed screws suits any home.
The Rheem six-star continuous flow range is suitable for both detached houses and apartments where compact solutions and energy efficiency are in demand.
With increased density living on the rise, builders need products for smaller spaces. The Rheem continuous flow range is compact – just 520mm high by 355mm wide and 187mm deep, ideal for tight installations.
These Rheem models can operate on a minimum water flow of just two litres per minute and have improved water flow at cold start-up, while also saving water.
Rheem says continuous-flow units offer 50°C temperature-limited models which can be adjusted up to 53°C for hotter water while still ensuring regulatory compliance.
Enhanced features include a digital monitor to show the set temperature, and also error codes for easy servicing should a fault occur. Rheem’s exclusive Flamesafe® overheat protection means the unit will automatically shut down if it overheats.
Rheem’s stainless-steel flue diverters can be fitted onto 12-, 16- or 26-litre models for difficult building installations. The diverters have a fixed heat shield for added householder safety, and suit either left- or right-handed installation. Optional temperature controllers can be fitted for convenience and safety.
Rheem EZ Link® system enables builders to link two units for up to 52-litres per minute delivery of hot water.