Enter your email and password to access secured content, members only resources and discount prices.
Did you become a member online? If not, you will need to activate your account to login.
If you are having problems logging in, please call HIA helpdesk on 1300 650 620 during business hours.
If you are having problems logging in, please call HIA helpdesk on 1300 650 620 during business hours.
Enables quick and easy registration for future events or learning and grants access to expert advice and valuable resources.
Enter your details below and create a login
Australian Standards referenced in the NCC are periodically amended or revised, and occasionally new Standards are introduced, and these are then incorporated into the NCC when it is revised through its normal revision cycle.
Are these new standards currently in effect?
The new editions of these standards will take effect alongside NCC 2022 from 1 May 2023.
Referenced Standards |
AS/NZS 1170 .2 2021 and AS 4055 2021(wind loading standards) |
AS 1288 2021 Glass in buildings Selection and installation |
AS 1397 2021 zinc coatings |
AS 1530.Part 8.1 2018 Fire testing for Bushfire attack |
AS 1684.2 2021 Residential Timber framing construction (Non cyclonic) |
AS 1684.3 2021 Residential Timber framing construction (cyclonic) |
AS/NZS 1720 Part 4 2019 timber structures |
AS 2118 .5 2008 (R2020) home fire sprinkler systems |
AS 2312 Part 1 2014 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings - Paint coatings |
AS/NZ 2312 Part 2 2014 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings - Hot dip galvanizing |
AS 2419 Part 1 2021 Fire hydrant installations - System design, installation and commissioning |
AS 2699 .1 and .3 2020 built in components for masonry construction |
AS 3740 2021 (waterproofing - internal) and AS 4654 (waterproofing - external) |
AS 3959 2018 Incorporating Amdts 1 and 2 Construction of buildings in bushfire prone areas |
AS 4055 2021 Wind loads for housing |
AS 4100 2020 steel structures |
AS 4200.1 2017 Amdt 1and 4200.2 2017 Amdt 2 (insulation and building wraps) |
AS 4254 Part 1 2021 Ductwork for air handling systems - Flexible Duct |
AAS 4254 Part 2 2012 Ductwork for air-handling systems in buildings - Rigid duct |
AS 4773 Part 1 2015 Masonry in small buildings - Design (incorporating amendment 1) |
AS 4773 part 2 2015 Masonry in small buildings - Construction (incorporating amendment 1) |
AS/NZS 4858 2004 Wet area membranes (New) |
AS 5146 Part 3 2018 Reinforced AAC - construction (New) |
AS 5216 2021 Design of post-installed and cast-in fastenings in concrete |
AIRAH-DA07 2021Criteria for moisture control design analysis in buildings |
ASTM E96 2016 Standard Test Methods for Water Vapor Transmission of Materials |
NASH Standard Part 2 2021 Steel Framed Construction in Bushfire Areas |
For plumbing work |
AS/NZS 1546 Parts 1-4 On-site domestic wastewater units (New) |
AS/NZS 1547 2012 On-site domestic wastewater management |
AS/NZS 4234 2021 Heated water systems - Calculation of energy consumption |
AS 3500 series Parts 1 - 4 2021 Plumbing and Drainage |
AS 5601.1 2013 Gas installations (New) |
FPAA 101D 2021 Sprinkler standard |
FPAA 101H 2018 Sprinkler standards Amdt1 |
Can’t find what you need, check out other resources that might be closer to the mark.
Instant delivery of the Australian Standards to your device is an easy go-to reference.